We have received the new accreditation for our two facilities in Denmark following an assessment by the European Certification Services Ltd, who verified the company to meet the quality management requirements for the sales, installation, service and support of surface treatment machines and automation systems.

Clemco Denmark has developed a system for robotic surface treatment ideal for large wind turbine tower sections measuring up to 8 meters in diameter and 35 meters in length.

Come visit us on PaintExpo 2018 in Karlsruhe in Germany. You are welcome on our booth 3416 in hall 3. We are looking forward to present our latest robot.

Clemco Denmark invites you to Scandinavian Coating 2017 - Scandinavia's leading trade fair for surface treatment. The exhibition takes place the 15th and 16th of March 2017 in Øksnehallen in Copenhagen. Visit Clemco Denmark at our booth # 05:13. We look very much forward seeing you!

Check out our new course dates for shot blasting and airless spray painting.

The PaintExpo 2016 takes place in Karlsruhe Exhibition Centre in Germany, the 19th to 22nd of April 2016. The opening hours are from 9:00 in the morning until 17:00 in the afternoon, and you will find us on our booth no. 1351 in hall 1. The exhibition will cover a wide range of all surface coating steps from the initial surface preparation to the final top coat with different paint systems in order to make long lasting coatings of all types of surfaces.

Clemco has developed a brand new Wet-Blast Flex system that operates significantly better than this type of competitive items. Our new Wet Blast-Flex blasting system is a new blasting system performing shot blasting while a small amount of Water is added under pressure. This means that the dust formation is minimized during the shot blasting process.

Clemco Denmark has designed a new showroom in the Skanderborg department. Here we the opportunity to show you our latest systems and equipment within surface treatment. We have made the decision to deploy a 180 m2 showroom with the most sold of our surface preparation systems.

One of the biggest savings within shot blasting can be achieved by using the right kind of abrasives with the longest life cycle providing minimal dust during the shot blasting proces.

We will again this year invite partners and clients for our yearly Clemco Fair 2016, where we will show together with our partners, their products and solutions for surface treatment.

We have received the new accreditation for our two facilities in Denmark following an assessment by the European Certification Services Ltd, who verified the company to meet the quality management requirements for the sales, installation, service and support of surface treatment machines and automation systems.

Clemco Denmark has developed a system for robotic surface treatment ideal for large wind turbine tower sections measuring up to 8 meters in diameter and 35 meters in length.

Come visit us on PaintExpo 2018 in Karlsruhe in Germany. You are welcome on our booth 3416 in hall 3. We are looking forward to present our latest robot.

Clemco Denmark invites you to Scandinavian Coating 2017 - Scandinavia's leading trade fair for surface treatment. The exhibition takes place the 15th and 16th of March 2017 in Øksnehallen in Copenhagen. Visit Clemco Denmark at our booth # 05:13. We look very much forward seeing you!

Check out our new course dates for shot blasting and airless spray painting.

The PaintExpo 2016 takes place in Karlsruhe Exhibition Centre in Germany, the 19th to 22nd of April 2016. The opening hours are from 9:00 in the morning until 17:00 in the afternoon, and you will find us on our booth no. 1351 in hall 1. The exhibition will cover a wide range of all surface coating steps from the initial surface preparation to the final top coat with different paint systems in order to make long lasting coatings of all types of surfaces.

Clemco has developed a brand new Wet-Blast Flex system that operates significantly better than this type of competitive items. Our new Wet Blast-Flex blasting system is a new blasting system performing shot blasting while a small amount of Water is added under pressure. This means that the dust formation is minimized during the shot blasting process.

Clemco Denmark has designed a new showroom in the Skanderborg department. Here we the opportunity to show you our latest systems and equipment within surface treatment. We have made the decision to deploy a 180 m2 showroom with the most sold of our surface preparation systems.

One of the biggest savings within shot blasting can be achieved by using the right kind of abrasives with the longest life cycle providing minimal dust during the shot blasting proces.

We will again this year invite partners and clients for our yearly Clemco Fair 2016, where we will show together with our partners, their products and solutions for surface treatment.